YMP-II Roller Oven-manufacture,factory,supplier from China

What is a roller assembly line? As the name implies, it is to use roller conveyors as the transmission machinery of the whole assembly line, which can transport some flat-bottomed items along a horizontal angle or a smaller inclination angle. For parts such as boards, non-flat-bottomed items or flexible items can be transported by pallets or other flat-bottomed containers.Why use a roller conveyor as the transmission machinery of the assembly line? The reasons are as follows:1.

1. Unit production capacityThis refers to the capacity of machinery to produce food products, that is, the rate at which a certain food is produced. For example, how many mooncakes can be baked per unit time (hour) in a tunnel oven. Food production is often assembly line work, in the production line there are always many machines and equipment in order to complete a product. For example, the moon cake production line is composed of batching, mixing, mixing, molding, baking, packaging and other equipment, and there are various conveying and auxiliary equipment in the middle.

　　Before you get a food extruder, make sure you do your homework on the machine you’re buying so you can get the most out of it. Consider these things before you buy an extrusion machine.Type Of Extruder:　　Piston extruders, roller-type extruders, and screw extruders are the 3 kinds of extruders commonly used to make packed food products, with the latter being the most common.　　For food processing, you should determine if you require a single-screw extruder or a double-screw extruder.

The pet chew production line is specially used for the production of dog chew products. It uses a unique extrusion method and mold to produce strip, rod, twist, two-color or multi-color chews with various shapes and sandwiches.1. Process flow of dog chewsRaw material preparation → mixing → extrusion molding → cooling and conveying → cutting machine → conveying → drying → packaging.2. Configuration and introduction of dog chewing equipment①Mixing machine→②Screw conveyor→③Single screw extruder→④Cooler→⑤Cut off machine→⑥Elevator→⑦Oven.1.

Screw extruder is mainly used in the production of starch extruded food, protein extruded food and extruded feed in the food industry, and can also be used as a special chemical or biochemical reactor.Starch puffed foodThe starch in the grain will gelatinize (αize) under the high temperature and pressure of the extruder. The results showed that the degree of starch αization was more than 98% and the crude fat decreased by 60% or even disappeared after the puffed corn flour. Water solubility increased by more than 40%. Therefore, extruder can replace roller dryer to produce gelatinized starch.

The difference between single screw extruder and twin screw extruder1. Differences in useThe food generally produced by the twin-screw extruder does not require a large extrusion force. The extrusion force of twin-screw extruder is not as good as that of single-screw extruder, so it is generally used for products such as snacks and dog food that do not require high extrusion.The single-screw extruder generally needs a large extrusion force to make some food.

Production line in transportation and storage, should keep clean to avoid direct sunlight or rain and snow immersion, prevent contact with acid, alkali, oil, organic solvents and other substances, and away from the heating device one meter away.Storage warehouse temperature should be kept between 18-40℃, relative humidity should be kept between 50-80%. During storage, the food line must be placed in rolls, not folded, and should be turned once a quarter during storage.

The structure of the food packaging line must be in a normal state to work and use normally. In order to ensure that the equipment can be packaged and processed normally for a long time, everyone is required to ensure that the selected equipment has good structural quality, good structural stability, and can maintain structural stability during use.Simple and easy: From the perspective of optimized product packaging, everyone is required to choose equipment with convenient structure and relatively simple operation, so that the use of equipment can be easily optimized.

The control of the operating parameters of the extruder includes: control of the temperature and humidity of the raw material entering the extruder; control of the temperature and pressure of each section of the extruder; control of the maximum point of dough viscosity in the extruder; extrusion speed control of extrudate temperature and time in each section; time control when the product temperature rises to the maximum extrusion temperature and temperature control at the final outlet.In principle, the longer the dough stays in the extruder, the more energy it can absorb and the temperature w

Screw and barrelTwin-screw extruders, as the name implies, have two screws whose function is to push the material forward. This helps distribute heat into the resin in an even manner. You can use different types of twin screws. This includes co-rotating screws, where the screws rotate in the same direction. We also have counter-rotating screws, which rotate in the opposite direction.Screws are said to engage each other when the centerline between their axes is exactly less than the diameter of the screw.